All Publications

International Publications

2024
1. P.K. Bhuyan, J. Meher and L. Mohanty (2024) Soil erosion estimation using RUSLE: a case study of Bamnidhi sub basin, Volume 30, 2024 - Issue 2, Pages 273-280, https://doi.org/10.1080/09715010.2024.2301721
2023
2. Pany, Rajashree, AshutoshRath, and Prakash Chandra Swain. "Water quality assessment for River Mahanadi of Odisha, India using statistical techniques and Artificial Neural Networks." Journal of Cleaner Production 417 (2023): 137713.
3. Dash, P. K., Pathi, S. K., Patro, S. K. and Panigrahi, R.,2023, Influence of chemical constituents of binder and activator in predicting compressive strength of fly ash-based geopolymer concrete using firefly-optimized hybrid ensemble machine learning model, Materials Today Communications SCIE, vol 37, 107485
4. Dash, P. K., Pathi, S. K., Patro, S. K. and Panigrahi, R.,2023, Efficient machine learning algorithm with enhanced cast swarm optimization for prediction of compressive strength of GGBS-based geopolymer concrete at elevated temperature, Construction and Building materials, https://doi.org/10.1016/j.conbuildmat.2023.132814, SCIE, vol 400, October,
5. Prusty, R. S., Jena, S. and Panigrahi, R., 2023, Characterisation and life-cycle assessment of alkali-activated concrete using industrial wastes, International Journal of Environmental Science and Technology, DOI 10.1007/s13762-023-05100-7, SCIE, online 29 July
6. Jena, S. and Panigrahi, R.,2023, Evaluation of Durability and Microstructural Properties of Geopolymer Concrete with Ferrochrome Slag as Coarse Aggregate, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Springer, SCIE
7. R. L. Sahu, R. R. Dash, and P. K. Pradhan, ‘Laboratory and field studies on the effect of geoenvironmental factors on the removal of linear alkylbenzene sulfonate during riverbank filtration’, Arabian Journal of Geosciences, vol. 16, no. 1, pp. 1–15, Jan. 2023. https://doi.org/10.1007/s12517-022-11098-y
8. L. Mohanty, P. Istalkar and B. Biswal (2023) Dynamic aspects of suspended-sediment-concentration recession curves, Journal of Hydrology, Volume 617, Part C, 2023, 129107, ISSN 0022-1694, https://doi.org/10.1016/j.jhydrol.2023.129107
2022
9. Jena, S. and Panigrahi, R.,2022, Study on the Durability and Microstructure of Geopolymer concrete with ferrochrome slag and Silica fume, International Journal of Structural Engineering, Inderscience Scopus, Vol 12(3), pp.302-319
10. R. L. Sahu, R. R. Dash, and P. K. Pradhan, ‘A study on adsorption of anionic surfactant from water during river bank filtration’, Journal of Molecular Liquids’, Aug. 2022. https://doi.org/10.1016/j.molliq.2022.119247
11. R. L. Sahu, R. R. Dash, and P. K. Pradhan, ‘Laboratory and field studies to assess the effect of hydro geological parameters on coliform removal during river bank filtration’, J. Hazard. Toxic Radioact. Waste, vol. 26, Apr. 2022. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000666
12. L. Subhadarsini, R. R. Dash, M. Mohapatra, and R. L. Sahu, ‘Equilibrium and kinetic studies on sorption of boron on industrial wastes’, J. Hazard. Toxic Radioact. Waste, vol. 26, no. 1, Jan. 2022. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000657
2021
13. Rath, Ashutosh, et al. "Impact Assignment of Integrated Watershed Management in the Micro Watersheds of S ambalpur District, O disha, I ndia." Handbook of Water Harvesting and Conservation: Case Studies and Application Examples (2021): 341-358.
14. Rath, Ashutosh, and Prakash Chandra Swain. "Water allocation from Hirakud Dam, Odisha, India for irrigation and power generation using optimization techniques." ISH Journal of Hydraulic Engineering 27.3 (2021): 274-288.
15. Rath, Ashutosh, and Prakash Chandra Swain. "Optimal allocation of agricultural land for crop planning in Hirakud canal command area using swarm intelligence techniques." ISH Journal of Hydraulic engineering 27.1 (2021): 38-50.
16. Jena, S. and Panigrahi, R.,2021, Performance evaluation of sustainable geopolymer concrete produced from ferrochrome slag and silica fume, European Journal of Environmental and Civil Engineering, : https://doi.org/10.1080/19648189.2021.1886179, Taylor and Francis, SCIE
2020
17. Pattnaik, Pooja, et al. "Application of statistical parameters for flow analysis of Hirakud reservoir Odisha India." Authorea Preprints (2020).
18. Rath, Ashutosh, and Prakash Chandra Swain. "Evaluation of performance of irrigation canals using benchmarking techniques–a case study of Hirakud dam canal system, Odisha, India." ISH journal of hydraulic engineering 26.1 (2020): 51-58.
19. Upadhyaya, S., Nanda, B. and Panigrahi, R., 2020, Effect of granite dust as partial replacement to natural sand on strength and ductility of reinforced concrete beams, Journal of Institute of Engineers (India): Series A, Springer, Scopus
20. R. L. Sahu, R. R. Dash, and P. K. Pradhan, ‘Use of soil conservation service curve number and filtration coefficient approach for simulating Escherichia coli removal during river bank filtration’, J. Water Proc.engineering, vol. 37, p. 101432, Oct. 2020. https://doi.org/10.1016/j.jwpe.2020.101432
2019
21. Rath, Ashutosh, SandeepSamantaray, and Prakash Chandra Swain. "Flow Measurement in Huma Tail distributary of Hirakud Command Area, India using Chiu's Equation." Pertanika Journal of Science & Technology 27.1 (2019).
22. 1Jena, S. and Panigrahi, R., 2019, Performance assessment of geopolymer concrete with partial replacement of ferrochrome slag as coarse aggregate, Construction and Building Materials, Elsevier, Vol 220, 525-537. SCIE
23. Rath, Ashutosh, SandeepSamantaray, and Prakash Chandra Swain. "Discharge measurement in part of Hirakud Canal System, Odisha, India, using Chiu’s equation." Journal of The Institution of Engineers (India): Series A 100 (2019): 479-486.
24. Jena, S., Panigrahi, R. and Sahu, P., 2019, Mechanical and Durability Properties of Fly Ash Geopolymer Concrete with Silica Fume, Journal of Institute of Engineers (India): Series A, Springer, Vol 100, 697–705.Scopus
25. Rath, Ashutosh, SandeepSamantaray, and Prakash Chandra Swain. "Optimization of the cropping pattern using cuckoo search technique." Smart Techniques for a Smarter Planet: Towards Smarter Algorithms (2019): 19-35.
26. Jena, S. and Panigrahi, R., 2019, Parametric study on sustainable geopolymer concrete, International Journal of Sustainable Materials and Structural Systems, Vol 3, Issue 3-4, 218-234.
27. L. Mohanty, P. Istalkar and B. Biswal (2023) Dynamic aspects of suspended-sediment-concentration recession curves, Journal of Hydrology, Volume 617, Part C, 2023, 129107, ISSN 0022-1694, https://doi.org/10.1016/j.jhydrol.2023.129107
28. R. L. Sahu, R. R. Dash, P. K. Pradhan, and P. Das, ‘Effect of hydrogeological factors on removal of turbidity during river bank filtration: Laboratory and field studies’, Groundw. Sustain. Dev., vol. 9, p. 100229, Oct. 2019. https://doi.org/10.1016/j.gsd.2019.100229
2018
29. Rath, Ashutosh, et al. "Application of Genetic Algorithm to Derive an Optimal Cropping Pattern, in Part of Hirakud Command." Progress in Computing, Analytics and Networking: Proceedings of ICCAN 2017. Springer Singapore, 2018.
2017
30. Samantaray, Sandeep, AshutoshRath, and PrakashChadra Swain. "Conjunctive use of groundwater and surface water in a part of Hirakud command area." International Journal of Engineering and Technology (IJET) 9.4 (2017): 3002-3010.
31. Rath, Ashutosh, and P. C. Swain. "Development of an Optimal Irrigation Model under Hirakud Catchment Area." IWRA (India) Journal (Half Yearly Technical Journal of Indian Geographical Committee of IWRA) 6.2 (2017): 10-17.
2016
32. Kaur, N., Bhalla, S., Shankar, R. and Panigrahi, R , 2016, Experimental Evaluation of Miniature Impedance Chip for Structural Health Monitoring of Prototype Steel/ RC structures, Experimental Techniques, Vol 40, 981-992 SCIE
33. Sarkar, L., Biswal, S.K., Panigrahi, R. and Sarkar, B., 2016, ‘A Comparative Study to Assess the Removal Efficiency of Iron from Drinking Water Using Various Activated Charcoals’, Environment and Ecology, Vol 34 (3A), 1178-1183
34. Swain, P., et al. "Agriculture: The Cutting Edge of Innovations and Developments." (2016).
2015
35. Sarakar, L., Biswal, S.K., Panigrahi, R. and Sarkar, B., 2015, ‘Estimation of Filtration Potential of an Effective Biosand Filter for Removal of Iron, Turbidity from Various Sources of water’, Current World Environment, June 2015, 10(2),656-662
2014
36. M. Patnaik, K.C. Patra, K.K. Khatua & L. Mohanty (2014) Modelling boundary shear stress in highly sinuous meandering channels, ISH Journal of Hydraulic Engineering, 20:2, 161-168, DOI: 10.1080/09715010.2013.860733
37. L. Mohanty, K.C. Patra, K.K. Khatua & M. Patnaik (2014) Modelling the depth-averaged velocity in trapezoidal meandering channels, ISH Journal of Hydraulic Engineering, 20:1, 111-118, DOI: 10.1080/09715010.2013.857472
2013
38. Ghose, D.K., Panda, S.S. , Swain, P.C. (2013) “Prediction and optimization of runoff via ANFIS and GA”, Alexandria Engineering Journal (International Journal), 52, 209–220.www.elsevier.com/locate/aej , http://dx.doi.org/10.1016/j.aej.2013.01.001
39. Bhalla, S., Panigrahi, R. and Gupta, A. (2013), “Damage Assessment of Tensegrity Structures using Piezo-Transducers”, Meccanica, Vol 48.Issue 6, 1465-1478, bimonthly.
2011
40. Ghose, D.K. and Swain, P.C. (2011) Erosion and sediment characteristics of peninsular river, India, A case study. International Journal of Engineering Science and Technology (ISSN : 0975-5462). Vol. 3 No. 5 . PP. 3716 – 3725.
41. Ghose, D.K., Panda, S.S. and Swain, P.C. (2011) Sedimentation load analysis using ANN and GA. International Journal of Applied Mechanics and Materials, Vols. 110-116 pp 2693-2698. Trans Tech Publications, Switzerland. doi:10.4028/www.scientific.net/AMM.110-116.2693
2010
42. Panigrahi, R., Bhalla, S., Gupta, A., Pande, H., and Prakash, A.,2010, “Experimental investigations on low cost foldable tensegrity structures”, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, Vol 3, Issue 1, 341-45.
43. Panigrahi, R., Bhalla, S. and Gupta, A., 2010, “Development and analysis of a prototype dismountable tensegrity structure for shelter purposes”, International Journal of Earth Sciences and Engineering, , Vol 3, Issue 4, 561-78.
44. Ghose, D.K., Panda, S.S. and Swain, P.C. (2010) Prediction of water table depth in western region, Orissa using BPNN and RBFN Neural Networks. Journal of Hydrology (International Journal), No. 394, pp. 296-304, DOI information: 10.1016/j.jhydrol.2010.09.003, http://dx.doi.org/10.1016/j.jhydrol.2010.09.003
45. Panigrahi, R., Gupta, A. and Bhalla, S., 2010, “A low cost variant of electro-mechanical impedance(EMI) technique for structural health monitoring”, Experimental Techniques, Vol 34, Issue 2, 25-29.
2009
46. Panigrahi, R., Gupta, A. and Bhalla, S., 2009, “ Dismountable steel tensegrity grids as light-weight roof structures ”, Steel and Composite Structures, Vol 9, Issue No 3, 239-253.
47. Swain, P.C. and Umamahesh V. Nanduri (2009) “Neuro-fuzzy inference system for operation of a multi-purpose reservoir”, Hydroinformatics in Hydrology, Hydrogeology and Water Resources, International Association of Hydrological Sciences Publ. 331.
2008
48. Panigrahi, R., Gupta, A. and Bhalla, S., 2008, “Design of tensegrity structure using Artificial Neural Networks”, Structural Engineering and Mechanics, Techno Press, Vol 29, Issue 2, pp 223-235.
2000
49. Swain, P.C., Ch. Seshachalam and Umamahesh, N.V.(2000). “Flood Estimation: A Neural Network Approach.” In Kassel Reports of Hydraulic Engineering, F. Toensmann and M. Koch Eds., No. 9/2000, D137-145
50. Parhi, S. K., Patro, S. K. (2024). Parametric Analysis and Prediction of Geopolymerization Process. Materials Today Communications, Elsevier (SCIE, IF-3.7), Vol. 41, pp. 111047. https://doi.org/10.1016/j.mtcomm.2024.111047
51. Nanda, B., Mishra, J., Patro, S. K. (2024). Synthesis of Rice Husk Ash based Alkaline Activators for Geopolymer Binder Systems: A Review. Journal of Building Engineering, Elsevier (SCIE, IF-6.7), Vol. 91, pp. 109694. https://doi.org/10.1016/j.jobe.2024.109694
52. Ijmulwar, S. S., Patro, S. K. (2024). Seismic design of reinforced concrete buildings equipped with viscous dampers using simplified performance-based approach. In Structures, Elsevier (SCIE, IF-3.9), Vol. 61, pp. 106020. https://doi.org/10.1016/j.istruc.2024.106020
53. Mishra, J., Nanda, B., Patro, S. K., & Krishna, R. S. (2024). A comprehensive review on compressive strength and microstructure properties of GGBS-based geopolymer binder systems. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 417, pp. 135242. https://doi.org/10.1016/j.conbuildmat.2024.135242
54. Acharya, P. K., & Patro, S. K. (2024). Strength, Wear-Resistance, Degree of Hydration, Energy and Carbon Performance of Concrete Using Ferrochrome Waste Materials. Iranian Journal of Science and Technology, Transactions of Civil Engineering, Springer (SCIE, IF-1.7), Vol. 48(1), pp. 353-362.
55. Das, S. K., Behera, N., Patro, S. K., Mustakim, S. M., Suda, Y., & Leklou, N. (2024). Effectiveness of rice husk ash-derived alkali activator in fresh, mechanical, and microstructure properties of geopolymer mortar at ambient temperature curing. Journal of Sustainable Cement-Based Materials, Taylor & Francis (SCIE, IF-4.7), Vol. 13(2), pp. 213-221. https://doi.org/10.1080/21650373.2023.2262465
56. Parhi, S. K., & Patro, S. K. (2024). Application of R-curve, ANCOVA, and RSM techniques on fracture toughness enhancement in PET fiber-reinforced concrete. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 411, pp. 134644. https://doi.org/10.1016/j.conbuildmat.2023.134644
57. Parhi, S. K., & Patro, S. K. (2024). Compressive strength prediction of PET fiber-reinforced concrete using Dolphin echolocation optimized decision tree-based machine learning algorithms. Asian Journal of Civil Engineering, Springer (Scopus), Vol. 25(1), pp. 977-996. https://doi.org/10.1007/s42107-023-00826-8
58. Das, S. K., Nayak, M. K., Patro, S. K., & Suda, Y. (2023). Durability Properties of Ambient Cured Geopolymer Mortar Made from Rice Husk Ash–Based Alkali Activator: A Comparative Study with Conventional Alkali Activator. Advances in Civil Engineering Materials, ASTM, (Scopus, Emerging sources citation, WoS, IF-1.4), Vol. 12(1), pp. 314-328. https://doi.org/10.1520/ACEM20230069
59. Dutta, B., Nayak, A. N., Dirar, S., Nanda, B.,Theofanous, M. (2022). Shear strengthening of continuous RC T-beams with deep embedded CFRP and steel bars: A numerical study. Structures, Elsevier (SCIE, IF- 4.010): Accepted subject to minor revision and the revision submitted.
60. Dash, P. K., Parhi, S. K., Patro, S. K., & Panigrahi, R. (2023). Influence of chemical constituents of binder and activator in predicting compressive strength of fly ash-based geopolymer concrete using firefly-optimized hybrid ensemble machine learning model. Materials Today Communications, Elsevier (SCIE, IF-3.7), Vol. 37, pp. 107485. https://doi.org/10.1016/j.mtcomm.2023.107485
61. Singh, S., Patro, S. K., & Parhi, S. K. (2023). Evolutionary optimization of machine learning algorithm hyperparameters for strength prediction of high-performance concrete. Asian Journal of Civil Engineering, Springer (Scopus), Vol. 24(8), pp. 3121-3143. https://doi.org/10.1007/s42107-023-00698-y
62. Dutta, B., Kumari, A., Nayak, A. N. (2022). Shear behaviour of RC deep beams retrofitted with externally bonded GFRP fabrics: Experimental and numerical study. Structures, Elsevier (SCIE, IF- 4.010), Vol.46, pp. 1-16.https://doi.org/10.1016/j.istruc.2022.10.042.
63. Lenka, B. P., Majhi, R. K., Singh, S. Nayak, A. N. (2022). Eco-friendly and cost-effective concrete utilizing high-volume blast furnace slag and demolition waste with lime. European Journal of Environmental and Civil Engineering, Taylor & Francis (SCIE, IF -2.187),VOL. 26 (11), pp. 5351-5373. https://doi.org/10.1080/19648189.2021.1896581.
64. Dash, P. K., Parhi, S. K., Patro, S. K., & Panigrahi, R. (2023). Efficient machine learning algorithm with enhanced cat swarm optimization for prediction of compressive strength of GGBS-based geopolymer concrete at elevated temperature. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 400, pp. 132814. https://doi.org/10.1016/j.conbuildmat.2023.132814
65. Patel, G., Nayak, A. N. (2022). Buckling behaviour and design aids of cylindrical panel subjected to uniform in-plane loading. International Journal of Structures,Inderscience (Scopus),Vol. 12 (4), pp. 321-339.https://doi.org/10.1504/IJSTRUCTE.2022.126184.
66. Parhi, S. K., & Patro, S. K. (2023). Prediction of compressive strength of geopolymer concrete using a hybrid ensemble of grey wolf optimized machine learning estimators. Journal of Building Engineering, Elsevier (SCIE, IF-6.7), Vol. 71, pp. 106521. https://doi.org/10.1016/j.jobe.2023.106521
67. Acharya, P. K., & Patro, S. K. (2023). Evaluation of environmental disturbance indicator using functional performance and life cycle assessment of ferrochrome waste concrete. Journal of Building Engineering, Elsevier (SCIE, IF-6.7), Vol. 65, pp. 105788. https://doi.org/10.1016/j.jobe.2022.105788
68. Dutta, B., Nayak, A. N., Nanda, B.,  Dirar, S. (2022). Reinforced concrete deep beam shear retrofitted with deep embedded bars: A numerical investigation. Materials Today: Proceedings,Elsevier (Scopus), Vol. 60, pp. 281-287.https://doi.org/10.1016/j.matpr.2021.12.563.
69. Majhi, R. K., Swain, R. B., Nayak, A. N. (2021). Structural Performance of RC beams containing high-volume ground granulated blast furnace slag and recycled coarse aggregate with lime. Construction and Building Materials, Elsevier (SCIE, IF- 7.693), Vol. 307, 124907.https://doi.org/10.1016/j.conbuildmat.2021.124907.
70. Rao, M. M., Patro, S. K., & Acharya, P. K. (2023). Utilisation of plastic waste as synthetic fiber and aggregate in concrete–a review. The Open Civil Engineering Journal, (Scopus), 17. https://doi.org/10.2174/18741495-v17-e230113-2022-HT31-3975-4
71. Sinha, L. Tripathy, A., Nayak, A. N., Sahu, S. K. (2021).Free vibration behaviour of angle-ply laminated composite stiffened plates. International Journal of Structural Stability and Dynamics, World Scientific Publisher (SCIE, IF-2.957, Vol. 21 (13), 2150187.https://doi.org/10.1142/S021945542150187X.
72. Acharya, P. K., & Patro, S. K. (2022). Evaluation of functional, microstructural, environmental impact, and economic performance of concrete utilizing ferrochrome ash and slag. Journal of Sustainable Metallurgy, Springer (SCIE, IF-2.5), Vol. 8(4), pp. 1573-1589. https://doi.org/10.1007/s40831-022-00587-9
73. Mishra, J., Nanda, B., Patro, S. K., & Krishna, R. S. (2022). Sustainable fly ash based geopolymer binders: a review on compressive strength and microstructure properties. Sustainability, MDPI (SCIE, IF-3.3), Vol. 14(22), pp. 15062. https://doi.org/10.3390/su142215062
74. Majhi, R. K., Patel, S. K., Nayak, A. N. (2021).Sustainable structural lightweight concrete utilizing high-volume fly ash cenosphere. Advances in Concrete Construction: An International Journal, Techno Press (SCIE, IF. 2.580), Vol. 12 (3), 251-270.https://doi.org/10.12989/acc.2021.12.3.257.
75. Majhi, R. K., Padhy, A., Nayak, A. N. (2021). Performance of structural lightweight concrete produced by utilizing high volume of fly ash cenosphere and sintered fly ash aggregate with silica fume. Cleaner Engineering and Technology, Elsevier (Scopus), Vol. 3, Volume 3, July 2021, 100121. https://doi.org/10.1016/j.clet.2021.100121 .
76. Mishra, J., Nanda, B., Patro, S. K., Das, S. K., & Mustakim, S. M. (2022). Influence of ferrochrome ash on mechanical and microstructure properties of ambient cured fly ash-based geopolymer concrete. Journal of Material Cycles and Waste Management, Springer (SCIE, IF-2.7), Vol. 24(3), pp. 1095-1108. https://doi.org/10.1007/s10163-022-01381-1
77. Patel. G., Nayak, A. N., Srivastava, A. K. L. (2021). Dynamic instability analysis and design charts of curved panels with linearly varying periodic in-plane load, International Journal of Structural Stability and Dynamics, World Scientific Publisher (SCIE, IF-2.957), Vol. 21 (9), 2150130.https://doi.org/10.1142/S0219455421501303
78. Dash, M. K., Patro, S. K., Acharya, P. K., & Dash, M. (2022). Impact of elevated temperature on strength and micro-structural properties of concrete containing water-cooled ferrochrome slag as fine aggregate. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 323, pp. 126542. https://doi.org/10.1016/j.conbuildmat.2022.126542
79. Mishra, J., Nanda, B., Patro, S. K., Das, S. K., & Mustakim, S. M. (2022). Strength and microstructural characterization of ferrochrome ash-and ground granulated blast furnace slag-based geopolymer concrete. Journal of Sustainable Metallurgy, Springer (SCIE, IF-2.5), Vol. 8, 156-169. https://doi.org/10.1007/s40831-021-00469-6
80. Patel, G., Nayak, A. N. (2021). Static stability analysis and design aids of curved panels subjected to linearly varying in-plane loading. Journal of Institution of Engineers (India)-Series A, Springer (Scopus), Vol. 102 (2), 565-589. https://doi.org/10.1007/s40030-021-00517-0.
81. Kagan Sogut, K., Dirar, S., Theofanous, M., Asaad Faramarzi, A., Nayak, A. N. (2021). Effect of transverse and longitudinal reinforcement ratios on the behaviour of RC T-beams shear-strengthened with embedded FRP BARS. Composite Structures, Elsevier (SCI, IF- 6.603), Vol. 262, 15 April 2021, 113622.https://doi.org/10.1016/j.compstruct.2021.113622.
82. Tiwary, K., Patro, S. K., Gandomi, A. H., & Sahoo, K. S. (2022). Model updating using causal information: a case study in coupled slab. Structural and Multidisciplinary Optimization, Springer (SCIE, IF-3.6), Vol. 65(2), pp. 62. https://doi.org/10.1007/s00158-021-03166-w
83. Kumari A., Nayak, A. N. (2021). An Experimental approach for strengthening of RC deep beams with web openings using GFRP fabrics and gas actuated fasteners. Journal of Building Engineering, Elsevier (SCI, IF-7.144), Vol. 35, March 2021, 102027.https://doi.org/10.1016/j.jobe.2020.102027.
84. Krishna, R. S., Mishra, J., Nanda, B., Patro, S. K., Adetayo, A., & Qureshi, T. S. (2021). The role of graphene and its derivatives in modifying different phases of geopolymer composites: A review. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 306, pp. 124774. https://doi.org/10.1016/j.conbuildmat.2021.124774
85. Sahoo S. K., Mohapatra B. G., Patro S. K., and Acharya P.K. “Evaluation of graded layer in ground granulated blast furnace slag based layered concrete”, Construction and Building Materials, Vol 276, 2021
86. Sinha, L., Das, D., Nayak, A. N., Sahu, S. K. (2021). Experimental and numerical study on free vibration characteristics of laminated composite plate with/without cut-out, Composite Structures, Elsevier (SCI, IF- 6.603), Vol. 256, 15 January 2021, 113051.https://doi.org/10.1016/j.compstruct.2020.113051 .
87. Dash M. K., and Patro S. K. “Performance assessment of ferrochrome slag as partial replacement of fine aggregate in concrete”, European Journal of Environmental and Civil Engineering, DOI: 10.1080/19648189.1539674, 2018
88. Sinha, L., Jena, T., Nayak, A. N. (2021). Forced vibration analysis of laminated composite stiffened plates. International Journal of Structural Engineering, Inderscience (Scopus), Vol. 11 (2), 2021, 173-188.https://doi.org/10.1504/IJSTRUCTE.2021.114263.
89. Dash M. K., and Patro S. K. “Effects of water cooled ferrochrome slag as fine aggregate on the properties of concrete”, Construction and Building Materials, Vol 177, 2018, pp.457-466
90. Kumari, A. Nayak, A. N. (2021). Strengthening of shear deficient RC deep beams using GFRP sheets and mechanical anchors, Canadian Journal of Civil Engineering (SCI, IF-1.380), Vol. 48 (1), 1-15. https://doi.org/10.1139/cjce-2019-0333.
91. Das S, Saha P. C, and Patro S. K. “Seismic protection of the benchmark highway bridge with passive hybrid control system”, Earthquakes and Structures, Vol. 15, No. 3 (2018), pp. 227-241
92. Majhi, R. K., Nayak, A. N., Mukharjee, B. B. (2020). Characterization of lime activated recycled aggregate concrete with high-volume ground granulated blast furnace slag, Construction and Building Materials, Elsevier (SCIE, IF- 7.693), Vol.259.23 June 2020, 119882.https://doi.org/10.1016/j.conbuildmat.2020.119882.
93. Acharya P. K. and Patro S. K., “Bond, Permeability and Acid Resistance Characteristics of Ferrochrome Waste Concrete”, ACI Materials, Vol. 115 (3), 2018, pp 359-368
94. Majhi, R. K., Nayak, A. N. (2020). Production of sustainable concrete utilising high-volume blast furnace slag and recycled aggregate with lime activator, Journal of Cleaner Production, Elsevier (SCIE, IF- 11.072), Vol. 255, 10 May 2020, pp. 1-14. 120188. https://doi.org/10.1016/j.jclepro.2020.120188.
95. Mohanty, S.K., Pradhan, P. K. and Mohanty, C.R. (2016) “Consolidation and Drainage Characteristics of Expansive Soil Stabilized with Fly ash and Dolochar”. Journal of Geotechnical & Geological Engineering, Springer.
96. Prusty J. K., Patro S. K.andMohanty T., “Structural Behaviour of Reinforced Concrete Beams Made with Ferrochrome Slag as Coarse Aggregate”, KSCE Journal of Civil Engineering, DOI 10.1007/s12205-017-1294-2, 2017, (Springer)
97. Sinha, L., Mishra, S.S., Nayak, A.N., Sahu, S.K. (2020). Free vibration characteristics of laminated composite stiffened plates: Experimental and Numerical investigation, Composite Structures, Elsevier (SCI, IF- 6.603), Volume 233, 1 February 2020. https://doi.org/10.1016/j.compstruct.2019.111557
98. C. R. Mohanty, U. Mishra, P. R. Beuria, Municipal Solid Waste Management in Bhubaneswar, India -A review, International Journal of Latest Trends in Engineering & Technology, 3(3),303-309,2014.
99. Saha A, Saha P. C, and Patro S. K., “Polynomial Friction Pendulum Isolators (PFPIs) for Seismic Performance Control of Benchmark Highway Bridge”, Earthquake Engineering and Engineering Vibration, Vol. 16, 2017,pp 827-840(Springer).
100. Mohanty, S.K., Pradhan, P. K. and Mohanty, C.R. (2016)” Stabilization of Expansive Soil using Industrial wastes” Vol.12, No.1, 111-125.Journal of Geomechanics and Engineering.
101. Patel, S. K., Satpathy, H. P., Nayak, A. N., Mohanty, C. R. (2020). Utilization of fly ash cenosphere for production of sustainable lightweight concrete. Journal of The Institution of Engineers (India): Series A, Springer (Scopus), Vol. 101 (1), 2020, pp. 179-194.https://doi.org/10.1007/s40030-019-00415-6.
102. J. Mishra, B. Nanda, S.K. Patro, R.S. Krishna (2022). "Sustainable Fly Ash Based Geopolymer Binders: A Review on Compressive Strength and Microstructure Properties." Sustainability, Vol. 14, No. 22, pp. 15062:1-41. https://doi.org/10.3390/su142215062.
104. Kumari, A. Dalai, N., Swain, R. B., Nayak, A. N. (2020). Shear Strengthening of RC Beams using GFRP Sheets.   International Journal of Structural Engineering, Inderscience (Scopus), Vol. 10 (2), 2020, pp. 174-194.https://doi.org/10.1504/IJSTRUCTE.2020.105638.
105. J. Mishra, B. Nanda, S.K. Patro, S.K. Das, S.M. Mustakim (2022). "Influence of ferrochrome ash on mechanical and microstructure properties of ambient cured fly ash based geopolymer concrete." Journal of Material Cycles and Waste Management. Vol. 24, No. 3, pp. 1095-1108. https://doi.org/10.1007/s10163-022-01381-1.
106. Panda, S.; Pradhan, M.; Panigrahi, S. K. (2024): Comparative study of OPC and PPC-based concrete properties containing bottom ash and fly ash as fine aggregate”, The Indian Concrete Journal, Vol. 98, No. 7, pp. 1-13 (Scopus)
107. P. K. Pradhan, C. R. Mohanty, A. K. Swar, P. Mohapatra, Urban solid waste management of Guwahati city in north-east India, Journal of Urban and Environmental Engineering, 6(2), 67-73, 2012.
108. Acharya P. K. and Patro S. K. “Strength, Sorption and Abrasion Characteristics of Concrete using Ferrochrome Ash (FCA) And Lime as Partial Replacement of Cement”, Cement and Concrete Composites, Vol. 74, 2016, pp 16-25. (Elsevier)
109. Sahoo, S., Mohanty, C.R., Pradhan, P. K. and Mohanty, C.R. (2014), “Utilization of Dolochar in Road Construction” 4(2A),37-41, Journal of Civil Engineering Research.
110. P. K. Pradhan, C. R. Mohanty, A. K. Swar, Characterization and energy potential of urban solid waste of Guwahati city, Waste Management, 32, 789-791, 2012.
111. Swain S. S. and Patro S. K. and Sinha R. “Numerical Methodology for Dynamic Analysis of Buildings with Friction Dampers”, Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 49(3), 2016, pp 245-266
112. Swar, N. S., Pradhan, P. K., (2014), “Foundation on Layered Soil under Torsional harmonic Vibration using Cone Model” Vol. 3, pp 08-17, International Journal of Engineering Inventions.
113. Majhi, R. K., Nayak, A. N., Mukherjee, B. B. (2020). An overview of the properties of sustainable concrete using fly ash as replacement for cement. International Journal of Sustainable Materials and Structural Systems, Inderscience, Vol. 4 (1), 2020, pp. 47-90.https://doi.org/10.1504/IJSMSS.2020.106418.
114. S.S. Mohapatro, J. Mishra, B. Nanda, S.K. Patro (2022). "A review on waste-derived alkali activators for preparation of geopolymer composite." Materials Today: Proceedings, Vol. 56, No. 1, pp. 440-446. https://doi.org/10.1016/j.matpr.2022.01.400.
115. Behera, H. K.; Das, S. S; Giri, D.; S. K. Panigrahi, (2022): Application of ANN for evaluating WMA marshall parameters. Materials Today: Proceedings, Elsevier (Scopus), 62(12), 6708-6721. https://doi.org/10.1016/j.matpr.2022.04.759.
116. C. R. Mohanty, B. C. Meikap, Modeling the operation of a three-stage fluidised bed reactor for removing CO2 from flue gases, Journal of Hazardous Materials, 187, 113-121, 2011.
117. Prusty J. K., Patro S. K. and Basarkar S. S. “Concrete using Agro-waste as Fine Aggregate for Sustainable Built Environment-A Review”, International Journal of Sustainable Built Environment (2016), Accepted for publication. (Elsevier).
118. Swar, S.N., Pradhan, P. K and Mishra, B.P.,(2014) “Parametric Investigation of Foundation on Layered Soil under Vertical Vibration” Vol. 04, pp 13-22, IOSR Journal of Engineering.
119. Patel, S. K., Majhi, R.K., Satpathy, H.P., Nayak, A.N. (2019). Durability and microstructural properties of light weight concrete manufactured with fly ash cenosphere and sintered fly ash aggregate. Construction and Building Materials, Elsevier (SCIE, IF- 7.693), Vol. 226, 30 November 2019, pp. 579-590. https://doi.org/10.1016/j.conbuildmat.2019.07.304.
120. B. Dutta, A.N. Nayak, B. Nanda, S. Dirar (2022). "Reinforced concrete deep beam shear retrofitted with deep embedded bar: a numerical investigation." Materials Today: Proceedings, Vol. 60, No. 1, pp. 281-287. https://doi.org/10.1016/j.matpr.2021.12.563.
121. Mohanty, L.; S, K. Panigrahi, S. K; Patnaik, M. (2022): Assessment of Water Quality of Mahanadi Basin using Statistical and Wavelet Techniques. Materials Today: Proceedings, Elsevier (Scopus), 62(12), 6371-6378. https://doi.org/10.1016/j.matpr.2022.03.381.
122. Majhi, R. K., Nayak, A. N. (2019). Bond, durability and microstructural characteristics of ground granulated blast furnace slag based recycled aggregate concrete. Construction and Building Materials, Elsevier (SCIE, IF- 7.693), Vol. 212, pp. 578-595.https://doi.org/10.1016/j.conbuildmat.2019.04.017.
123. J. Mishra, B. Nanda, S.K. Patro, S.K. Das, S.M. Mustakim (2022), "Strength and microstructural characterization of ferrochrome ash and ground granulated blast furnace slag based geopolymer concrete." Journal of Sustainable Metallurgy, Vol.8, pp. 156-169. https://doi.org/10.1007/s40831-021-00469-6.
124. Pradhan, P.; Panda, S.; Parhi, S. K. Panigrahi, S. K.; (2022): Variation in fresh and mechanical properties of GGBFS based self-compacting geopolymer concrete in the presence of NCA and RCA. Materials Today: Proceedings, Elsevier (Scopus), 62(12), 6348-6358. https://doi.org/10.1016/j.matpr.2022.03.337.
125. C. R. Mohanty, B. C. Meikap, Studies on solids mean residence time in a threestage gas-solid fluidized bed with downcomer, Korean Journal of Chemical Engineering, 28(3),969-973, 2011.
126. Acharya P. K. and Patro S. K “Utilization of ferrochrome wastes such as ferrochrome ash and ferrochrome slag in concrete manufacturing”, Waste Management Research (2016), DOI: 10.1177/0734242X16654751. (Sage).
127. Munda, J., Pradhan, P. K and Nayak., A.K., (2014)“A Review on the Performance of Modified Cam Clay Model for Fine Grained soil”, Vol. 1, pp 65-71, Journal of Civil Engineering and Environmental Technology.
128. C. R. Mohanty, B. Rajmohan, B. C. Meikap, Identification of stable operating ranges of countercurrent fluidized bed reactor with downcomer, Chemical Engineering and Processing: Process Intensification, 49, 104-112,2010.
129. Das S, Saha P. C, and Patro S. K. “Vibration-based damage detection techniques used for health monitoring of structures: a review” Journal of Civil Structural Health Monitoring (2016), DOI 10.1007/s13349-016-0168-5. (Springer).
130. Kar R. K., Pradhan, P. K and Naik. A.(2014) “Effect of random inclusion of polypropylene fibers on strength characteristics of Cohesive soil”Vol. 19, . Journal of EJGE.
131. Satpathy, H. P., Patel, S. K., Nayak, A. N. (2019). Development of sustainable lightweight concrete using fly ash cenosphere and sintered fly ash aggregate. Construction and Building Materials, Elsevier (SCIE, IF- 7.693), Vol. 202, pp. 636-655.https://doi.org/10.1016/j.conbuildmat.2019.01.034.
132. J. Mishra, B. Nanda, S.K. Patro (2021), "Geopolymer composites for smart and sustainable infrastructure: A review." NICMAR Journal of Construction Management, Vol. 36, No. 4, pp. 50-57.
133. Pradhan, P.; Panda, S.; Parhi, S. K.; Panigrahi, S. K. (2022): Effect of critical parameters on the fresh properties of Self Compacting geopolymer concrete. Materials Today: Proceedings, Elsevier (Scopus), 62(12), 6325-6335. https://doi.org/10.1016/j.matpr.2022.02.506.
134. C. R. Mohanty, B. C. Meikap, Abatement of SO2 in a Multistage Counter-Current Gas-Solid Fluidized Bed Reactor, Chemical Engineering Transactions, 21, 583-588, 2010.
135. Kar R. K., Pradhan, P. K and Naik. A.(2012) “Consolidation Characteristics of Fiber Reinforced Cohesive Soil”, Vol. 17, EJGE
136. Singha, B. B., Mohanty, F, Das, S. S. and Swain, S. K. (2019) “Graphene Sandwiched Crumb Rubber Dispersed Hot Mix Asphalt.” Journal of Traffic and Transportation Engineering, DOI: https://doi.org/10.1016/j.jtte.2019.02.003
137. Majhi, R. K., Nayak, A. N. (2019). Properties of Concrete Incorporating Coal Fly Ash and Coal Bottom Ash. Journal of The Institution of Engineers (India): Series A, Springer (Scopus), Vol. 100 (3), September 2019, pp. 459-469.https://doi.org/10.1007/s40030-019-00374-y.
138. R.S. Krishna, J Mishra, B. Nanda, S.K. Patro, A. Adetayo, T.S. Qureshi (2021), "The role of graphene and its derivatives in modifying different phases of geopolymer composites: A review." Construction and Building Materials, Vol. 306, 124774, pp. 1-21. https://doi.org/10.1016/j.conbuildmat.2021.124774
139. Das, R.; Panda, S.; Sahoo, A. S.; Panigrahi, S. K. (2023): Effect of superplasticizer types and dosage on the flow characteristics of GGBFS based self-compacting geopolymer concrete. Materials Today: Proceedings, Elsevier (Scopus), https://doi.org/10.1016/j.matpr.2023.06.339.
140. Majhi, R. K., Nayak, A. N.,Mukharjee, B. B. (2018). Development of sustainable concrete using recycled coarse aggregate and ground granulated blast furnace slag. Construction and Building Materials, Elsevier (SCIE, IF- 7.693), Vol. 159, pp. 417-430.https://doi.org/10.1016/j.conbuildmat.2017.10.118
141. B. Nanda, S. Rout (2021), "Properties of concrete containing fly ash and bottom ash mixture as fine aggregate." International Journal of Sustainable Engineering, Vol. 14, No. 4, pp. 809-819. https://doi.org/10.1080/19397038.2021.1920641
142. Pradhan, J.; Panda, S.; Mandal, R. K.; Panigrahi, S. K. (2023): Influence of GGBFS-based blended precursor on fresh properties of self-compacting geopolymer concrete under ambient temperature. Materials Today: Proceedings, Elsevier (Scopus), https://doi.org/10.1016/j.matpr.2023.06.338.
143. C. R. Mohanty, A. K. Swar, Investigation on heavy metal distribution characteristics of nickel, copper and zinc, its impact on the ambient air quality of industrial steel city Rourkela, Orissa, India. Int. J. Environmental Pollution Control & Management, 2 (2), 99-124, 2010.
144. Acharya P. K. and Patro S. K. “Acid Resistance, Sulphate Resistance And Strength Properties of Concrete Containing Ferrochrome Ash (FA) And Lime”, Construction and Building Materials, Vol. 120, 2016, pp 241-250. (Elsevier).
145. P. K. Pradhan, C. R. Mohanty, A. K. Swar, P. Mohapatra, Urban solid waste management of Guwahati city in north-east India, Journal of Urban and Environmental Engineering, 6(2), 67-73, 2012.
146. Das, S. S. and Maitra B. (2019) “Two-stage choice-based demand model for rural feeder service to the bus stop,” Transportmetrica A: Transport Science, 15:2, 573-585, DOI: 10.1080/23249935.2018.1517134.
147. Pal, A. C. and Das, S. S. (2019) “Interlocking Aperture Concrete Block: An Answer to Permeable Pavement.” Journal of The Institution of Engineers (India): Series A 100: Issue 3, 427–438 https://doi.org/10.1007/s40030-019-00363-1
148. C. R. Mohanty, B. C. Meikap, Pressure drop characteristics of a multistage fluidized bed reactor for control of gaseous pollutants, Chemical Engineering and Processing: Process Intensification, 48(1), 209-216, 2009.
149. Dash M. K., Patro S. K. and Rath A. K. “Sustainable Use of Industrial-waste as Partial Replacement of Fine Aggregate for Preparation of Concrete - A Review”, International Journal of Sustainable Built Environment (2016), (Elsevier).
150. P. K. Pradhan, C. R. Mohanty, A. K. Swar, Characterization and energy potential of urban solid waste of Guwahati city, Waste Management, 32, 789-791, 2012.
151. Nayak, A. N., Kumari, A., Swain, R. B. (2018). Strengthening of RC beams using externally bonded fibre reinforced polymer composites. Structures, Elsevier (SCIE, IF-4.010), Vol. 14, pp. 137-152.https://doi.org/10.1016/j.istruc.2018.03.004
152. B. Nanda, D. Maity, D.K. Maity (2021). "Element damage assessment in semi rigid connected structures using modal domain data." International Journal of Structural Engineering , Vol. 11, No. 1, pp. 44-62. https://doi.org/10.1504/IJSTRUCTE.2021.112092
153. Panigrahi, S. K., Deb, A. and Bhattacharyya, S. K. (2015) “Effect of laminate stiffness on failure mode in FRP wrapped T beams”. International Journal of Research in Engineering and Technology, Vol-4, No-13, pp.510-520, DOI: 10.15623/ijret.2015. 0425074, Link: http://ijret.esatjournals.org/Archive?VI=20150425.
154. C. R. Mohanty, S. Adapala, B. C. Meikap, Holdup characteristics of a novel gas solid multistage fluidized bed reactor for control of hazardous gaseous pollutants, Chemical Engineering Journal, 148(1), 115-121, 2009.
155. Saha A, Saha P. C, and Patro S. K., “Seismic response control of benchmark highway bridge using non-linear FV spring damper”, The IES Journal Part A: Civil and Structural Engineering, Vol. 8(4), 2015, pp 240-250. (Taylor & Francis)
156. Dash M. K., Patro S. K. and Rath A. K. “Sustainable Use of Industrial-waste as Partial Replacement of Fine Aggregate for Preparation of Concrete - A Review”, International Journal of Sustainable Built Environment (2016), http://dx.doi.org/10.1016/j.ijsbe.2016.04.006 (in press) (Elsevier).
157. Pradhan, P. K., Kar R. K. and Naik. A.(2011) “Effect of random inclusion of polypropylene fibers on strength characteristics of soil”. Journal of Geotechnical & Geological Engineering, Springer.
158. Panda, R. P., Das, S. S. and Sahoo, P. K. (2018) “Estimating In Situ Optimum Bitumen Content of Dense Bituminous Macadam: An Alternative Approach” Journal of The Institution of Engineers (India): Series A, Volume 99, Issue 4, 653–659, DOI: https://doi.org/10.1007/s40030-018-0322-7
159. Nayak, A.N.,Satpathy, L., Tripathy, P. K.  (2018). Free vibration Characteristics of Stiffened plates. International Journal of Advanced Structural Engineering, Springer (Scopus), Vol. 10 (2), pp 153-167.https://doi.org/10.1007/s40091-018-0189-x
160. S. Upadhyaya, B. Nanda, R. Panigrahi (2020). "Effect of Granite Dust as Partial Replacement to Natural Sand on Strength and Ductility of Reinforced Concrete Beams." Journal of The Institution of Engineers (India): Series A, Vol. 101, pp. 669-677. https://doi.org/10.1007/s40030-020-00472-2
161. Pradhan, P.; Panda, S.; Parhi, S. K.; Panigrahi, S. K. (2022): Factors affecting production and properties of self-compacting geopolymer concrete-A review. Construction and Building Materials, Elsevier (SCIE, IF-7.693), 344, 128174. https://doi.org/10.1016/j.conbuildmat.2022.128174.
162. Kumari, A., Patel, S. S., Nayak, A. N. (2018). Shear strengthening of RC deep beam using externally bonded GFRP fabrics. Journal of The Institution of Engineers (India): Series A, Springer (Scopus), Vol. 99(2), pp. 341-350.https://doi.org/10.1007/s40030-018-0272-0
163. A. Majumdar, B. Nanda (2020). "A Comparative Study on Inverse Vibration Based Damage Assessment Techniques in Beam Structure Using Ant Colony Optimization and Particle Swarm Optimization." Advanced Science, Engineering and Medicine, Vol. 12, pp. 918–923.
164. Pradhan, P.; Dwibedi, S.; Pradhan, M.; Panda, S.; Panigrahi, S. K. (2022): Durability characteristics of geopolymer concrete-Progress and perspectives. Journal of Building Engineering, Elsevier (SCIE, IF-7.144), 59, 105100. https://doi.org/10.1016/j.jobe.2022.105100.
165. (SCI Journals): Mukharjee, B. B., and Barai, S. V. (2015), Development of Construction Materials Using Nano-silica and Aggregates Recycled from Construction and Demolition Waste, Waste Management and Research (Accepted) (Impact factor: 1.114).
166. C. R. Mohanty, S. Adapala, B. C. Meikap, Removal of hazardous gaseous pollutants from industrial flue gases by a novel multistage fluidized bed desulfurizer, Journal of Hazardous Materials, 165(1-3) 427-434,2009.
167. Acharya P. K. and Patro S. K., “Effect of lime and ferrochrome ash (FA) as partial replacement of cement on strength, ultrasonic pulse velocity and permeability of concrete”, Construction and Building Materials, Vol. 94, 2015, pp 448-457. (Elsevier)
168. Saha A, Saha P. C, and Patro S. K., “Seismic response control of benchmark highway bridge using non-linear FV spring damper”, The IES Journal Part A: Civil and Structural Engineering, Vol. 8(4), 2015, pp 240-250. (Taylor & Francis).
169. Kar, R. K., Pradhan, P. K. and A. Naik (2011) “Triaxial compression of fiber-reinforced clay”. International Journal of Geotechnics and Environment, 3 (1), 35-47.
170. Identification of Flood vulnerable zones in Mahanadi Delta based on post-Hirakud Historical data (Accepted for publication in International Journal of Water)
171. Satishkumar, B., Maitra B. and Das, S. S. (2018) “Temporal shift in willingness-to-pay for rural feeder service to bus stop.” Travel Behaviour and Society, 12, 102-107.
172. Tanti, K. B., Mukarjee, B. B. and Das, S. S. (2018) “A factorial design approach to analyse the effect of coarse recycled concrete aggregates on the properties of hot mix asphalt” Journal of The Institution of Engineers (India): Series A, Volume 99, Issue 2, pp 165–181..DOI https://doi.org/10.1007/s40030-018-0286-7
173. (SCI Journals): Mukharjee, B. B., and Barai, S. V. (2014), Influence of incorporation of nano-silica and recycled aggregates on compressive strength and microstructure of concrete, Construction and Building Materials, Vol. 71, pp. 570-578. (Impact Factor: 2.265).
174. C. R. Mohanty, G. Malavia, B. C. Meikap, Development of a counter-current multistage fluidized bed reactor and mathematical modeling for prediction of removal efficiency of sulfur dioxide from flue gases, Industrial & Engineering Chemistry Research, 48(3), 1629-1637, 2009.
175. A.K. Nayak, R.A. Shenoi and J.I.R. Blake, “ A Study of Transient Response of Initially Stressed Composite Sandwich Folded Plates”, Composites Part B: Engineering, Vol 44, 2013, pp.67-75.
176. Pattanaik S. C., Gopalkrishnan E., and Patro S. K., “A Study of deterioration of Reinforced Cement Concrete Structures in Mumbai”, Indian Concrete Journal, Vol. 89(5), 2015, pp 51-58.
177. Acharya P. K. and Patro S. K., “Effect of lime and ferrochrome ash (FA) as partial replacement of cement on strength, ultrasonic pulse velocity and permeability of concrete”, Construction and Building Materials, Vol. 94, 2015, pp 448-457. (Elsevier).
178. Kar, A.K., Lohani, A.K. Goel, N.K., and Roy, G.P. (2010) “Development of Flood Forecasting  System using Statistical and ANN Techniques in the    Downstream Catchment of Mahanadi basin”, India, Journal of Water Resources and Protection, Vol. 2(10), pp.880-887.
179. Pradhan, P. K. and Kar R. K. (2011) “Strength and compressibility characteristics of randomly distributed fiber-reinforced soil”, International Journal of Geotechnical Engineering, USA, Vol. 5, Issue 2, 235-243.
180. Swain, R. B., Nayak, A. N. (2015). Flexural Analysis of RC Beams Strengthened with Externally Bonded FRP Sheets. International Advanced Research Journal in Science, Engineering and Technology, Vol. 2, Issue 4, April 2015, pp. 61-67http://10.17148/IARJSET.2015.2415
181. J. Mishra, S.K. Das, R.S. Krishna, B. Nanda (2020). "Utilization of ferrochrome ash as a source material for production of geopolymer concrete for a cleaner sustainable environment." Indian Concrete Journal, Vol. 94, No. 7, pp. 40-49.
182. Prusty, S.R., Panigrahi, R. and Jena, S., 2023. Characterisation and life-cycle assessment of alkali-activated concrete using industrial wastes. International Journal of Environmental Science and Technology, pp.1-16.
183. Parhi, S. K.; Dwibedy, S.; Panda, S.; Panigrahi, S. K. (2023): A comprehensive study on Controlled Low Strength Material. Journal of Building Engineering, Elsevier (SCIE, IF-7.144), 76, 107086, https://doi.org/10.1016/j.jobe.2023.107086.
184. (SCI Journals): Mukharjee, B. B., and Barai, S. V. (2014), Statistical Techniques to Analyze Properties of Nano-Engineered Concrete Using Recycled Coarse Aggregates, Journal of Cleaner Production, Vol. 83, pp. 273-285. (Impact Factor: 3.590)
185. S. Roy, C. R. Mohanty, B. C. Meikap, Multistage fluidized bed reactor performance characterization for adsorption of carbon dioxide, Industrial & Engineering Chemistry Research, 48, 10718-10727, 2009.
186. A.K. Nayak, R.A. Shenoi and S.S.J. Moy, “Dynamic response of Composite Sandwich Plates Under In-Plane Stresses”, Composites Part-A: Applied Science and Manufacturing, Vol. 37, 2006, pp.1189-1205.
187. Prusty J. K. and Patro S. K., “Properties of Fresh and Hardened Concrete using Agro-waste as Partial Replacement of Coarse Aggregate – A Review”, Construction and Building Materials, Vol. 82, 2015, pp 101-113. (Elsevier)
188. Prusty J. K. and Patro S. K., “Properties of Fresh and Hardened Concrete using Agro-waste as Partial Replacement of Coarse Aggregate – A Review”, Construction and Building Materials, Vol. 82, 2015, pp 101-113. (Elsevier).
189. Lohani, A.K., Kar, A.K. and Goel, M.K. (2011) “Mahanadi basin me baadh pravandhan”, National conference on “Jal sansadhano ke prabandhan me navintam taknik ka prayog,” NIH, Roorkee, Dec. 16-17, 2011.
190. Kar, R. K., Pradhan, P. K. and A. Naik (2010) “Strength characteristics of randomly distributed fiber-reinforced Soil”, International Journal of Earth Science & Engineering, Vol.3, No.3, 434-440.
191. Panda, R. P., Das, S. S. and Sahoo, P. K. (2018) “Relation Between Bitumen Content and Percentage Air Voids in Semi Dense Bituminous Concrete” Journal of The Institution of Engineers (India): Series A, Volume 99, Issue 2, pp 327–332, DOI: https://doi.org/10.1007/s40030-018-0282-y .
192. Nayak, A. N., Prajapati, G. N., Swain, R. B. and Swetapadma, S. (2015). Strengthening of square RC columns using externally Bonded FRP Sheets. International Journal of Structural Analysis & Design, Vol. 2 (1), pp.15 - 19.
193. J. Mishra, S.K. Das, R.S. Krishna, B. Nanda, S.K. Patro, S.M. Mustakim (2020). "Synthesis and characterization of a new class of geopolymer binder utilizing ferrochrome ash (FCA) for sustainable industrial waste management." Materials Today: Proceedings, Vol. 33, pp. 5001-5006. https://doi.org/10.1016/j.matpr.2020.02.832.
194. Prusty, S.R., Behera, D., Panigrahi, R. and Jena, S., 2023. Improvement of Durability Aspects of CAC-Based Alkali-Activated Concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering, pp.1-19.
195. Parhi, S. K. and Panigrahi, S. K. (2023): Alkali-silica reaction expansion prediction in concrete using hybrid metaheuristic optimized machine learning algorithms. Asian Journal of Civil Engineering, Springer (Scopus), https://doi.org/10.1007/s42107-023-00799-8.
196. Nayak, A. N., Bandyopadhyay, J. N. (2006). Dynamic response analysis of stiffened conoidal shells. Journal of Sound and Vibration, Elsevier (SCI and Scopus, IF-4.761), Vol. 291, No. 3-5, April 2006, pp. 1288-1297. http://journals.theired.org/journals/paper/details/5618.html
197. Jena, S. and Panigrahi, R., 2022. Study on the durability and microstructure of geopolymer concrete with ferrochrome slag and silica fume. International Journal of Structural Engineering, 12(3), pp.302-319.
198. Pradhan, J.; Panda, S.; Parhi, S. K.; Pradhan, P.; Panigrahi, S. K. (2023): GGBFS-based Self-Compacting Geopolymer Concrete with Optimized Mix Parameters established on Fresh, Mechanical, and Durability Characteristics. Journal of Materials in Civil Engineering, ASCE, (SCIE, IF-3.651), https://doi.org/10.1061/JMCEE7.MTENG-16669.
199. A. Majumdar, B. Nanda, D. Maity, D.K. Maiti (2014). “Structural damage detection based on modal parameters using continuous ant colony optimization.” Advances in Civil Engineering, Article Id. 174185, pp. 1- 14. https://doi.org/10.1155/2014/174185.
200. (SCI Journals): Mukharjee, B. B., and Barai, S. V. (2014), Assessment of the influence of nano-silica on behavior of mortar using factorial design of experiments, Construction and Building Materials, Vol. 68, pp. 416-425. (Impact Factor: 2.265)
201. J. Acharya, J, N. Sahu, C. R. Mohanty, B. C. Meikap, Removal of lead (II) from wastewater by activated carbon developed from Tamarind wood by zinc chloride activation, Chemical Engineering Journal, 149(1-3),249-262,2009.
202. Giri, D. (2014) “Pseudo-dynamic approach of passive earth pressure behind cantilever retaining wall with inclined back-fill” Journal of Geomechanics and Geoengineering,9(1),72-78.
203. A.K. Nayak, R.A. Shenoi and S.S.J. Moy, “Transient Response of Initially Stressed Composite Sandwich Plates”, Finite Elements in Analysis and Design, Vol. 42, 2006, pp.821-836.
204. Mohapatra B. G., Sahoo S. K., Patro S. K., Paikaray B., “Failures in Raft Foundation-A case study”, International Journal of 3R’s , Vol. 5(2), 2014, pp 707-710.
205. Mohapatra B. G., Sahoo S. K., Patro S. K., Paikaray B., “Failures in Raft Foundation-A case study”, International Journal of 3R’s , Vol. 5(2), 2014, pp 707-710.
206. Kar, A. K., Lohani, A. K., Goel, N. K. and Roy, G. P.,(2012) “Application of Clustering Techniques using Prioritised Variables in Regional Flood Frequency Analysis - a Case Study of Mahanadi Basin”, ASCE, Journal of Hydrologic Engineering, Vol. 17(1). pp. 213-223.
207. Sahoo, J. P.andPradhan, P. K. (2010) “Effect of Lime Stabilized Soil Cushion on Strength Behaviour of Expansive Soil”, Journal of Geotechnical & Geological Engineering, Springer, Vol. 28, No. 6, 889-897.
208. Panda, R. P., Das, S. S. and Sahoo, P. K. (2017) “Optimum bitumen content for bituminious concrete – An alternative approach for estimation” International Journal of Civil Engineering and Technology, 8(10), pp. 435–453.
209. Panda, R. P., Das, S. S. and Sahoo, P. K. (2016). “An empirical method for estimating surface area of aggregates in hot mix asphalt.” Journal of Traffic and Transportation Engineering, April, 2016, 3(2), 127-136.
210. B. Nanda, D. Maity, D.K. Maity (2014). “Damage assessment from curvature mode shape using unified particle swarm optimization.” Structural Engineering and Mechanics, Vol. 52, No. 2, pp. 307-322. http://dx.doi.org/10.12989/sem.2014.52.2.307.
211. (SCI Journals): Mukharjee, B. B., and Barai, S. V. (2014), Influence of nano-silica on the properties of recycled aggregate concrete, Construction and Building Materials, Vol. 55, pp.29-37. (Impact Factor: 2.265)
212. J. Acharya, J, N. Sahu, B. K. Sahoo, C. R. Mohanty, B. C. Meikap, Removal of chromium (VI) from wastewater by activated carbon developed from Tamarind wood activated with zinc chloride, Chemical Engineering Journal, 150(1), 25-39, 2009.
213. Giri, D. (2011) “ Pseudo-dynamic approach of active earth pressure behind cantilever retaining wall with inclined back-fill” Journal of Geomechanics and Engineering, 3(4), 255-266.
214. A.K. Nayak, S.S.J. Moy and R.A. Shenoi, “A Higher Order Finite Element Theory For Buckling and Vibration Analysis of Initially Stressed Composite Sandwich Plates”, Journal of Sound and Vibration, Vol. 286, 2005, pp.763-780.
215. Banerjee S., Patro S. K. and Rao P., “Inelastic seismic analysis of reinforced concrete frame building with soft storey”, International Journal of Civil Engineering Research, Vol. 5 (4), 2014
216. Banerjee S., Patro S. K. and Rao P., “Inelastic seismic analysis of reinforced concrete frame building with soft storey”, International Journal of Civil Engineering Research, Vol. 5 (4), 2014.
217. Jhajharia, D., Yadav, B.K., Maskey, S., Chatopadhyay, S. and Kar, A.K.(2012)  “Identification of trends in rainfall, rainy days and 24 hours maximum rainfall over sub-tropical Assam of North-East India.” Elsevier, Journal of CR Geosciences, Vol. 344(2012), pp.1-13.
218. Pradhan, P. K., Mandal, A., Baidya, D. K. and Ghosh D. P. (2008) “Dynamic Response of Machine Foundation on Layered Soil: Cone Model Versus Experiments”, Journal of Geotechnical & Geological Engineering, Springer, Vol. 26, No. 4, 453-468.
219. Nayak, A. N., Bandyopadhyay, J. N. (2005). Free vibration analysis of laminated stiffened shells,Journal of Engineering Mechanics, ASCE (SCI and Scopus, IF-2.620), Vol. 131, No.1, pp.100-105. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:1(100)
220. Patra, S.N., Patra, R.K., Mukharjee, B.B. and Jena, S., 2022. Development of sustainable concrete incorporating metakaolin and sintered fly ash aggregate. Structural Concrete, 23(4), pp.2246-2259.
221. Pradhan, J.; Panda, S.; Dwibedy, S.; Pradhan, P; Panigrahi, S. K. (2023): Production of durable high strength self-compacting geopolymer concrete with GGBFS as a precursor, Journal of Material Cycles and Waste Management, Springer, (SCIE, IF-3.579), https://doi.org/10.1007/s10163-023-01851-0.
222. A. Agarwal, B. Nanda, D. Maity (2014). “Experimental investigation on chemically treated bamboo reinforced concrete beams and columns.” Construction and Building Materials, Vol. 71, pp. 610-617. https://doi.org/10.1016/j.conbuildmat.2014.09.011 .
223. Dash, Rakesh Roshan, Mehrotra, I., Kumar, P., Grischek, T. “Study of water quality improvements at a riverbank filtration site along the upper course of the River Ganga, India”, Desalination and Water Treatment, 2014, 52 (16-18): 3355-3366.
224. (Non SCI Journals): Mukharjee, B. B., and Barai, S. V. (2014), Compressive strength of nano-silica incorporated Recycled Aggregate Concrete, International Journal of Advanced Research in Civil, Structural, Environmental and Infrastructure Engineering and Developing, Vol. 2, No.1, pp. 22-28.
225. C. R. Mohanty, S. Adapala, B. C. Meikap, Hydrodynamics of a multistage countercurrent fluidized bed reactor with downcomer for lime-dolomite mixed particle Industrial & Engineering Chemistry Research, 47(18), 6917–6924, 2008.
226. Sengupta, A., Giri, D. (2011) “Dynamic analysis of soil-nailed Slope”, Ground Improvement, 164(GI14), 225-234.
227. A.K. Nayak and R.A. Shenoi, “Assumed Strain Finite Elements For Buckling and Vibration Analysis of Initially Stressed Damped Composite Sandwich Plates”, Journal of Sandwich< Structures and Materials, Vol. 7, 2005, pp.307-334.
228. Banerjee S., and Patro S. K., “Estimation of the Park-Ang Damage Index for Floating Column Building with Infill Wall”, International Journal of Civil, Architectural, Structural and Construction Engineering, Vol. 8 (6), 2014, pp 760-763.( World Academy of Science)
229. Ghosh, S., Maitra, B. and Das, S. S., (2013) “Effect of Distributional Assumption of Random Parameters of Mixed Logit Model on Willingness-to-Pay Values.” Procedia - Social and Behavioral Sciences, 104 ( 2013 ) pp. 601- 610.
230. Das P. K., Gangadhariah T., (2000) ‘Mechanism of Breach Process of Earthen Dam Models”, Asia Pacific Division International Association of Hydraulic Research (APD-IAHR), at AIT, Bangkok.
231. Banerjee S., and Patro S. K., “Estimation of the Park-Ang Damage Index for Floating Column Building with Infill Wall”, International Journal of Civil, Architectural, Structural and Construction Engineering, Vol. 8 (6), 2014, pp 760-763.(World Academy of Science).
232.   Kar, A.K., Winn, L.L, Lohani, A.K. and Goel, N. K. (2012) “A Soft Computing Based Workable Flood Forecasting Model for Ayeyarwady River basin of Myanmar, ASCE Journal of Hydrologic Engineering, Vol. 17(7). pp. 807-822.
233. Sahoo, J. P., Pradhan, P. K. and Subha Rao, K. S. (2008) “Behavior of Stabilized Soil Cushions under Cyclic Wetting and Drying”, International Journal of Geotechnical Engineering, USA, Vol. 2 (2), 89-102.
234. A. K. Mishra and S. Chakraborty (2015) Determination of Material Parameters of FRP Plates With Rotational Flexibility at Boundaries Using Experimental Modal Testing and Model Updating, Experimental Mechanics, 55(5): 803-815.
235. Nayak, A. N., Bandyopadhyay, J. N. (2002). Free vibration analysis and design aids of stiffened conoidal shells. Journal of Engineering Mechanics, ASCE (SCI and Scopus, IF-2.620), Vol.128, No.4, pp. 419-427.https://doi.org/10.1061/(ASCE)0733-9399(2002)128:4(419)
236. Jena, S. and Panigrahi, R., 2021. Evaluation of Durability and Microstructural Properties of Geopolymer Concrete with Ferrochrome Slag as Coarse Aggregate. Iranian Journal of Science and Technology, Transactions of Civil Engineering, pp.1-10.
237. Dwibedy, S. and Panigrahi, S. K. (2023): Factors affecting the structural performance of geopolymer concrete beam composites. Construction and Building Materials, Elsevier (SCIE, IF-7.693), 409, 134129, https://doi.org/10.1016/j.conbuildmat.2023.134129.
238. Nayak, A. N., Bandyopadhyay, J. N. (2002). On the free vibrations of stiffened shallow shells. Journal of Sound and Vibration, Elsevier (SCI and Scopus, IF-4.761), Vol. 255, No. 2, pp. 357-382.https://doi.org/10.1006/jsvi.2001.4159
239. Jena, S. and Panigrahi, R., 2021. Performance evaluation of sustainable geopolymer concrete produced from ferrochrome slag and silica fume. European Journal of Environmental and Civil Engineering, pp.1-17.
240. Parhi, S. K.; Panda, S.; Dwibedy, S.; Panigrahi, S. K. (2024): Metaheuristic optimization of machine learning models for strength prediction of high-performance self-compacting alkali-activated slag concrete. Multiscale and Multidisciplinary Modeling, Experiments and Design, Springer, (ESCI, IF-2.2), https://doi.org/10.1007/s41939-023-00349-4.
241. B. Nanda, A. Majumdar, D. Maity, D.K. Maiti (2014). “Performance comparison among vibration based indicators in damage identification of structures.” Applied Mechanics and Materials, Vol. 592, pp. 2081-2085. https://doi.org/10.4028/www.scientific.net/AMM.592-594.2081.
242. “River Bank Filtration in Haridwar, India: Removal of Turbidity, Organics, and Bacteria”, Hydrogeol J., 2010, 18(4): 973-983.
243. (Non SCI Journals): Mukharjee, BB and Barai, SV (2014), Characteristics of Mortars containing colloidal Nanosilica, International Journal of Applied Engineering Research, Vol. 9, No. 1, pp. 17-22.
244. A. Biswas, B. Raj Mohan, C. R. Mohanty, B. C. Meikap, Characterization of a high efficiency pilot plant wet scrubber with internals for fly ash removal, The Open Chemical Engineering Journal, 2, 100-106, 2008.
245. Giri, D. and Sengupta, A. (2009) “Dynamic behavior of small scale nailed soil slopes” Journal of Geotechnical and Geological Engineering, 27(6), 687-698.
246. A.K. Nayak, R.A. Shenoi and S.S.J. Moy, “Transient Response of Composite Sandwich Plates”, Composite Structures, Vol. 64, 2004, pp.249-267.
247. Patro S. K., Mohanty T., and Mohanty M. K., “Use of Ferro-Chrome (FeCr) Slag as Aggregate in Concrete”, International Journal of 3R’s, Vol. 4(4), 2013
248. Maitra, B., Ghosh, S., Das, S. S. and Manfred Boltze (2013) “Effect of Model Specification on Valuation of Travel Attributes: A Case Study of Rural Feeder Service to Bus Stop.” Journal of Journal of Transport Literature, 7(2), 8-28 (2013).
249. Das P. K., Sahu Kaushik,(2002) “Cross-Functional Product Development Teams for Enhancing the Effectiveness of Supply Chain in the Housing Industry”, 25-26 April 2002, First International Conference on Construction in the 21st Century (Challenges and opportunities in Management and Technology) at Florida International University, Miami, Florida in association with ASCE.
250. Patro S. K., Mohanty T., and Mohanty M. K., “Use of Ferro-Chrome (FeCr) Slag as Aggregate in Concrete”, International Journal of 3R’s, Vol. 4(4), 2013.
251. Ajeet Singh Chhabra, Anil Kumar Lohani, VKD Dwivedi, Anil Kumar Kar, Joshi, N. (2014)“Identifying rainfall trends over North India using 1’X1’gided rainfall data(1951-2004), International Journal of Earth Sciences and Engineering, Vol. 7, No.01, pp. 155-163.
252. Baidya, D. K., Muralikrishna, G. and Pradhan, P. K. (2006) “Investigation of the foundation vibrations resting on a layered soil system, Journal of Geotechnical &Geoenvironmental Engineering, ASCE, Vol. 132, No. 1, 116-123.
253. A. K. Mishra and S. Chakraborty (2015) Development of a Finite Element Model Updating Technique for Estimation of Constituent Level Elastic Parameters of FRP Plates, Applied Mathematics and Computation, 258: 84-94.
254. Akash K. Naik, and Krishna P. Biligiri, “Predictive Models to Estimate Phase Angle of Asphalt Mixtures”, Journal of Materials in Civil Engineering, American Society of Civil Engineers, USA, Volume 27, Issue 8, August 2015, 04014235, pp. 1-13 (DOI: 10.1061/(ASCE)MT.1943-5533.0001197).
255. A. K. Mishra and S. Chakraborty (2016) Inverse Detection of Constituent Level Elastic Parameters of FRP Composite Panels with Elastic Boundaries using Finite Element Model Updating, Ocean Engineering, 111: 358-368.
256. B. Nanda, D. Maity, D.K. Maity (2014), “Modal parameter based inverse approach for structural joint damage assessment using unified particle swarm optimization.” Applied Mathematics and Computation, Vol. 242, pp. 407-422. https://doi.org/10.1016/j.amc.2014.05.115.
257. Dash, Rakesh Roshan, Mehrotra, I., Kumar, P., Grischek, T. “Lake Bank Filtration at Nainital, India: Water Quality Evaluation”, Hydrogeol J., 2008, 16(6): 1089-1099.
258. (Non SCI Journals): Mukharjee, BB and Barai, S V (2013), Influence of Nano-Silica on the Compressive Strength of Recycled Aggregate Concrete, International Journal of Civil Engineering and Applications Vol. 3, No. 2, pp. 35-38.
259. C. P. Diwevdi, J. N. Sahu, C. R. Mohanty, B. Raj Mohan, B. C. Meikap, Column performance of granular activated carbon packed bed for Pb (II) removal, Journal ofHazardous Materials, 156(3), 596-603, 2008.
260. Giri, D. and Sengupta, A. (2010) “Dynamic Behavior of Small-Scale Model of Nailed Steep Slopes” Journal of Geomechanics and Geoengineering. 5(2), 99-108.
261. A.K. Nayak, S.S.J. Moy and R.A. Shenoi, “Quadrilateral Finite Elements for Multi-layer Sandwich Plates”, Journal of Strain Analysis for Engineering Design, Vol. 38, 2003, pp.377-394.
262. “Lime stabilization of weak sub grade for construction of rural roads”-INTERNAIONAL JOURNAL of Earth science & Engineering _ISSN -0974-5904- Vol 05, NO.3 June -2012 Pg-554-561.
263. Patro S. K., Selvam R. P. and Bosch H, “Adaptive h-finite element modelling of wind flow around bridges”, Engineering Structures, Vol. 48, 2013, pp 569-577. (Elsevier)
264. Das, S. S, Maitra, B. and Manfred Boltze (2012) “Planning of Fixed-Route Fixed-Schedule Feeder Service to Bus Stops in Rural India.” Transportation Engineering, 138(10), 1274-1281. 10.1061/(ASCE)TE.1943-5436.0000419.
265. Das P. K.,(1993) “Risk Analysis Study of Design Flood for the Rivers of Orissa” 1993, International Seminar on Hydrology with Special Colloquium on Environmental Problems and Water Resources of Himalayan Region at Kathamandu, Nepal.
266. Patro S. K., Selvam R. P. and Bosch H, “Adaptive h-finite element modelling of wind flow around bridges”, Engineering Structures, Vol. 48, 2013, pp 569-577. (Elsevier).
267. R. Dandapat, A.  Deb, and S. K. Bhattacharyya, (2012). “Localized Failure in Fiber-Reinforced Polymer-Wrapped Cylindrical Concrete Columns.” ACI Structural Journal, 109(4), 445-456. [IF = 1.089]
268. Anil Kumar Kar, Anil Kumar Lohani, N K Goel, G P Roy, (2015) “Rain gauge network design for flood forecasting using multi-criteria decision analysis and clustering techniques in lower Mahanadi river basin, India”,  Journal of Hydrology: Regional Studies, Vol. (4), pp.313-332.
269. Pradhan, P. K., Baidya, D. K. and Ghosh D. P. (2004) “Dynamic response of foundations resting on layered soil by cone model”, International Journal of Soil Dynamics and Earthquake Engineering, Vol. 24 (6), 425-434.
270. Nayak, A. N., Bhattacharyya, S. K. (1998). Welded T-Joints with Hollow sections. International Journal of Structures (Scopus), Vol. 18, No.1, pp.29-50.
271. Jena, S. and Panigrahi, R., 2019. Performance assessment of geopolymer concrete with partial replacement of ferrochrome slag as coarse aggregate. Construction and Building Materials, 220, pp.525-537.
272. Parhi, S. K.: Dwibedy, S.; Panigrahi, S. K. (2024): AI-driven critical parameter optimization of sustainable self-compacting geopolymer concrete. Journal of Building Engineering, Elsevier (SCIE, IF-7.144), 86, 108923, https://doi.org/10.1016/j.jobe.2024.108923.
273. B. Nanda, D. Maity, D.K. Maity (2014). “Crack assessment in frame structures using modal data and unified particle swarm optimization technique.” Advances in Structural Engineering, Vol. 17, No. 5, pp. 747-768. https://doi.org/10.1260%2F1369-4332.17.5.747.
274. Dash, R., Dash, Rakesh Roshan, Balomajumdar, C. “Cyanide removal from aqueous solutions by immobilized whole cells of Pseudomonas putida on GAC”, Desalination and Water Treatment, 2013,52 (16-18): 3355-3366.
275. (Non SCI Journals): Prusty, R Mukharjee, BB and Barai, SV (2013), Mechanical Properties of Recycled Aggregate Concrete Containing Colloidal Nano-Silica Designed by Taguchi Method, International Journal of Civil Engineering and Applications, Vol. 3, No. 5, 5-8.
276. C. K. Sing, J.N. Sahu, K. K. Mahalik, C. R. Mohanty, B. Rajmohan, B. C. Meikap, Studies on the removal of Pb(II) from wastewater by activated carbon developed from Tamarind wood activated with sulfuric acid, Journal of Hazardous Materials, 153(1-2), 221-228,2008.
277. Giri, D. and Sengupta, A. (2009) “A Kinematic Limit Approach for the Stability Analysis of Nailed Soil Slopes” Asian Journal of Civil Engineering, 10(2), 163-176.
278. A.K. Nayak, S.S.J. Moy and R.A. Shenoi, “Free Vibration Analysis of Composite Sandwich Plates Based on Reddy's Higher-Order Theory”, Composites Part B: Engineering, Vol. 33, 2002, pp. 505-519.
279. “Cost effectiveness of clayey soil & moorum treated with fly-ash & lime for construction of low volume roads” -INTERNAIONAL JOURNAL of Civil & Structural Engineering _ISSN-0976-4399- Vol 02 ,NO.1 Nov- 2011 Pg-370-381.
280. Patro S. K. Sinha R., “Seismic Performance of Dry-Friction Devices in Shear-Frame Buildings”, Journal of Civil Engineering and Architecture, Vol. 4, No.12, 2010, pp 01-19.
281. Das, S. S., Ghosh, S., Maitra, B. and Boltze, M. (2012) “Search Strategy for Nested Logit Tree Structure: A Case Study of Rural Feeder Service to Bus Stop.” International Journal for Traffic and Transport Engineering, 2(4), 333-346.
282. Das P. K.,(2002) “Storm Water Drainage Management with Check Dams: A Case Study on Bhubaneswar City”, 11-13, December , International Conference on Water and Wastewater Perspective of Developing Countries at New Delhi, India, Section-IV, PP 343-349.
283. Patro S. K. Sinha R., “Seismic Performance of Dry-Friction Devices in Shear-Frame Buildings”, Journal of Civil Engineering and Architecture, Vol. 4, No.12, 2010, pp 01-19.
284. R. Dandapat, A.  Deb, and S. K. Bhattacharyya, (2011). “Failure Modes for FRP Wrapped Cylindrical Concrete Columns.” Journal of Reinforced Plastics and Composites, 30(7), 561-580. [IF = 1.503]
285. Krishna Kumar Gupta, Anil Kumar Kar, Joy Gopal Jena and Dipti Ranjan Jena “Variation   in Rainfall Trend at Upstream - A Threat towards Filling Schedule of Hirakud Reservoir, Accepted and on Print,  International Journal of Water.
286. Pradhan, P. K., Baidya, D. K. and Ghosh D. P. (2003) “Impedance functions of circular foundation resting on layered soil using cone model”, Electronic Journal of Geotechnical Engineering. Vol. 8 (B), Available: http://www.ejge.com/2003/ Ppr0323/Ppr0323.htm
287. SarmistaPadhy, Akash Kumar Naik, “Moisture Susceptibility on Asphalt Mix and the Effect of Anti - Stripping Additives” International Journal of Science Engineering and Advance Technology, VOL 4, NO 12 (2016)pg no 728-735
288. Asim Kumar Mishra, M Althaf and Sushanta Chakraborty (2018) Improved Numerical Modelling of Fiber Reinforced Plastics I-Beam from Experimental Modal Testing and Finite Element Model Updating, International Journal of Acoustics and Vibration, 23(1): 26-34.
289. Dubey, A. K., Nayak, A. N., Bhattacharyya, S. K. (1999). Strength of Thin-walled Steel-concrete Composite Beams: An Experimental Study. Journal of Institution of Engineers (India), (Scopus), Vol. 80, pp.37-41 (K. F. Antia National Award for best paper in engineering for the session 1999-2000).
290. Jena, S. and Panigrahi, R., 2018. Parametric study on sustainable geopolymer concrete. International Journal of Sustainable Materials and Structural Systems, 3(3-4), pp.218-234.
291. Panda, S.; Pradhan, M; Panigrahi, S. K. (2024): Optimal Red Mud replacement level evaluation in Conventional Concrete based on Fresh and Harden Concrete Characteristics, Journal of Sustainable Metallurgy, Springer, (ESCI, IF-2.4), https://doi.org/10.1007/s40831-024-00837-y.
292. Nayak, A. N., Bhattacharyya, S. K. (1997). Behaviour of Joints with Rectangular and Square Hollow Steel Sections. Journal of Institution of Engineers (India) (Scopus),Vol. 78, pp.116-122.
293. B. Nanda, D. Maity, D.K. Maity (2012). “Vibration-based structural damage detection technique using particle swarm optimization with incremental swarm size.” International Journal of Aeronautical and Space Sciences, Vol. 13, No. 3, pp. 323-331. https://doi.org/10.5139/IJASS.2012.13.3.323.
294. Dash, R., Dash, Rakesh Roshan, Verma, A., Bhunia, P. “Sand filtration: An effective post treatment option for aerobically treated wastewater, Journal of Industrial Research & Technology, 2012, 2(2), 81-87.
295. (Non SCI Journals): Prusty, R Mukharjee, BB and Barai, SV (2013), A Taguchi approach for investigation of mechanical properties of recycled aggregate conrete containing nano-silica, International Journal of SEWC, Vol. 4 , pp. 29-39.
296. B. Raj Mohan, S. Biswas, C. R. Mohanty, B. C. Meikap, Control of air pollutants by gas liquid contacting tower, International Journal of Chemical Engineering and. Sciences, 5(4), 1665-1677, 2007.
297. Giri, D. and Sengupta, A. (2010) “Dynamic Behaviour of Small-Scale Model Slopes in Shaking Table Tests” International Journal of Geotechnical Engineering, J. Ross Publishing Inc., 4(1), 1-11.
298. A.K. Nayak, R.A. Shenoi and S.S.J. Moy, “Analysis of Damped Composite Sandwich Plates Using Plate Bending Elements with Substitute Shear Strain Fields Based on Reddy's Higher-Order Theory”, Proceedings of The Institute of Mechanical Engineers, Journal of Mechanical Engineering Sciences, Vol. 216, 2002, pp.591-606.
299. J.Meher & R.Jha(2013)"Time series analysis of monthly rainfall data for the Mahanadi river basin,India",Sciences in cold and arid regions,5(1),73-84.
300. An experimental study on strength behavior of clayey sub grade soil stabilized with rice husk ash & lime for low volume Road construction”.- INTERNAIONAL JOURNAL of Earth science & Engineering _ISSN -0974-5904- Vol- 04 ,NO.2 April – 2011 Pg- 364-372.
301. Patro S. K. and Sinha R., “Influence of Friction Models on Aseismic Performance of Buildings with Dry-friction Devices”, International Journal of Engineering Uncertainty: Hazards, Assessment and Mitigation, Vol. 2, No. (3-4), 2010, pp 99-113.
302. Panigrahi, S. K., Deb, A. and Bhattacharyya, S. K.(2015). "Modes of failure in shear deficient RC T- beams strengthened with FRP". Journal of Composites for Construction, ASCE. DOI: 10.1061/(ASCE)CC.1943-5614.0000586 ).
303. Das, S. S, Maitra, B. and Manfred Boltze (2009) “Valuing Travel Attributes of Rural Feeder Service to Bus Stop: a Comparison of Different Logit Model Specifications.” Journal of Transportation Engineering, 135(6), pp. 330-337.
304. Das P. K.,(1989) “Influence of Leaping Weir on Main Channel Flow”, May , Third International Iranian Civil Engineering Congress at Siraz University, Iran.
305. Patro S. K. and Sinha R., “Influence of Friction Models on Aseismic Performance of Buildings with Dry-friction Devices”, International Journal of Engineering Uncertainty: Hazards, Assessment and Mitigation, Vol. 2, No. (3-4), 2010, pp 99-113.
306. R. Dandapat, and A.  Deb, (2016). “A Probability Based Model for the Erosive Wear of Concrete by Sediment Bearing Water.” Wear, Elsevier, 350-351, 166-181. [IF = 1.913]
307. Krishna Kumar Gupta, Anil Kumar Kar, Joy Gopal Jena and Dipti Ranjan Jena “Forecasting the rainfall pattern on upstream of Hirakud reservoir using L-moment for accessing the inflow” Accepted and on Print,  International Journal of Engineering and Technology.
308. Pradhan, P. K., Baidya, D. K. and Ghosh D. P. (2003) “Horizontal impedance of circular foundation resting on layered soil”, Electronic Journal of Geotechnical Engineering, Vol. 8 (D), Available: http://www.ejge.com/2003/ Ppr0340/Ppr0340.htm.
309. NIL
310. NIL
311. BarshaBaishaliMalla, Akash Kumar Naik, “The Effect of Aggregate Gradation on Design Mix using Modified Bitumen” International Journal of Science Engineering and Advance Technology, VOL 4, NO12 (2016)pg no736-744
312. 02
313. NIL
314. NIL
315. NIL
316. NIL
317. NIL
318. NIL
319. A. K. Mishra and S. Chakraborty (2018) Inverse Determination of Local Variations of Constituent Level Elastic Parameters of FRP Composite Plates, Inverse Problems in Science and Engineering, DOI: 10.1080/17415977.2018.1502289

National Publications

2023
1. Prusty, S., Jena, S. and Panigrahi, R.,2023, Assessment of acid and chloride resistance of ferrochrome slag-based geopolymer concrete, Indian Concrete Journal, Scopus, August
2022
2. Prusty, R. S., Jena, S. and Panigrahi, R.,2022, Fresh and Hardened properties of Geopolymer Concrete: a Review, Indian Concrete Journal, Scopus, November
3. Mohanty, T., Acharya, P. K., Patro, S. K., Saha, P., Khan A. M. (2024). Chemical and mechanical resistance of concrete containing ferrochrome slag aggregates. Indian Concrete Journal, (Scopus), Vol. 98(9), pp. 1-12.
4. Acharya, P. K., & Patro, S. K. (2023). Structural characteristics of reinforced concrete beams made of waste materials from ferrochrome industry. Indian Concrete Journal, (Scopus), Vol. 97(7), pp. 31-40.
5. Pradhan, P. K. and Kar, R. K. (2009) “Use of fly ash as filler in bitumen paving mixes”, High Way Research Journal Vol. 2, No. 1, 49-58.
6. Mohanty, T., Kumar, A., Acharya, P. K., Patro, S. K., & Saha, P. (2022). Performance of structural geopolymer concrete utilising ferrochrome ash and fly ash as source material. Journal of The Institution of Engineers (India): Series A, Springer (Scopus), Vol. 103(4), pp. 1183-1194. https://doi.org/10.1007/s40030-022-00681-x
7. Das. P.K. et.al (2014) “Breach Flow Hydrograph Due to Washout of Fuse Plug in an Earthen Dam” International Journal of Engineering Research And Application , January 2015,pp51-56,Vol 5,Issue I,Part-5.
8. Pradhan, P. K. (2007) “Horizontal impedance of rigid circular foundation resting on layered soil”, Journal of the Institution of Engineers (India), Civil Engng. Div., Vol. 88, 32-37. Recipient of The Brij Mohan Lal Memorial Prize (The Subject Prize).
9. Rao, M. M., Patro, S. K., & Basarkar, S. S. (2022). Mechanical and post-cracking performance of recycled high density polyethylene fiber reinforced concrete. Journal of The Institution of Engineers (India): Series A, Springer (Scopus), Vol. 103(2), pp. 519-530. https://doi.org/10.1007/s40030-022-00625-5
10. Das P.K, et. al.(2009) “Free convective MHD Flow Through Porous Media of a Rotating Visco- Elastic Fluid Past an Infinite Vertical Porous Plate With Heat and Mass Transfer in the Presence of Chemical Reaction”, Journal of Association for the Advancement of Modelling & Simulation Techniques in Enterprises (AMSE), France,Vol 78, No.4, pp21-37.
11. Pradhan, P. K. (2007) “Dynamic response of surface foundations on non-homogeneous half-space”.   Technical Journal, Orissa Engineering Congress, C-28-33, January 2007. Recipient of Santok Singh Memorial Gold Medal.
12. Acharya P. K. and Patro S. K., “Flexural Behavior of Reinforced Cement Concrete Beams Made With Air-Cooled Ferrochrome Slag Coarse Aggregate”, Indian Concrete Journal, February, 2021
13. C. R. Mohanty, B. B. Pani, S. K. Khuntia, Economic analysis of waste heat recovery system in sponge iron plants, e-planet, 10 (1), 53 – 56, 2013.
14. Das P.K,(2006) “Cross – Functional Teams For Enhancing the Effectiveness of Product Development”, Journal of IBC, PP- 8-16, Vol. -13.
15. Swain, P.C. (2002) “Flow Prediction with Neural Networks”, In Technical Annual, Vol. 43, The Institution of Engineers (India), 67-73 (Awarded).
16. Pradhan, P. K., Baidya, D. K. and Ghosh D. P. (2004) “Torsional vibration of foundations resting on a soil layer over rigid base”, Indian Geotechnical Journal, Vol. 34 (2), 226-242.
17. Moharana R. and Patro S. K., “Seismic response of sliding isolated soft story building using velocity dependent friction model”, ISET Journal of Earthquake Technology, Vol 56 (3), 2019, pp.77-95
18. C. R. Mohanty, A. K. Swar, B. C. Meikap, J. N. Sahu, Studies on factors influencing fly ash resistivity from electrostatic precipitator - with reference to India, Journal of Scientific and Industrial Research 70(9),795-803, 2011.
19. Das P. K. , Mishra S. C.(1992),“Data Base Management System in Water Resources Engineering” , Technical Journal, Institute of Engineers(India),Orissa State Centre, Vol 33, pp 70-79.
20. Swain, P.C. (2002) “Flow Prediction with Neural Networks”, In Orissa Engineering Congress Souvenir, Vol.47, The Institution of Engineers (India), Bhubaneswar, EECS-84 - 93 (Awarded).
21. Pradhan, P. K., Baidya, D. K. and Ghosh D. P. (2004) “Vertical dynamic response of foundation resting on a soil layer over rigid rock using cone model”, Journal of the Institution of Engineers (India), Civil Engng. Div., Vol. 85, 179-185. Recipient of The Sir Arthur Cotton Memorial Prize (Best journal paper award in Civil Engg. Div.).
22. Pattanaik S. C., Gopalkrishnan E., Ahmad M. and Patro S. K., “Petrographic investigation to assess condition of concrete exposed to fire, Indian Concrete Journal, August, 2019, pp 57-66
23. Dash, Rakesh Roshan, Dash, R. R. “Use of ecotoxicology for municipal solid waste and leachate from sanitary landfill”, Standards India, 2012, 26 (5), 5-10.
24. C. R. Mohanty, B. B. Pani, S. K. Khuntia, Environmental management In DRI steel plants In Orissa, e-planet, 8 (2) ,14-19, 2011.
25. Das P. K.(1993), “ Frequency Study of Design Flood For the River Brahamani”, Technical Journal, Institute of Engineers(India),Orissa State Centre.
26. Nath P.K., Swain, P.C. and Sahu, C. S. (2001)
27. Pradhan, P. K., Khandit, K. P. and Acharya, S. N. (1998) “Effect of geotextile reinforcement on load carrying and settlement behaviour of soil”.   Technical Journal, Orissa Engineering Congress - 1998, 23-29.   Recipient of Madhav Chandra Jena Memorial Running shield.
28. Banerjee S., Patro S. K. , “Inelastic Seismic Response of Building with Friction Damper ”, Journal of The Institution of Engineers (India): Series A, DOI 10.1007/s40030-016-0184-9, 2016, (Springer)
29. Dash, Rakesh Roshan, Kumar, P., Mehrotra, I., Uniyal, H. P. “Bed Filtration: Water Quality Evaluation at Kalsi”, Journal of Indian Water Resources Society, 2005, 25 (2), 31-38.
30. S. Sahoo, K. Dash, M. Mohanty, A. Bhoi, C.R. Mohapatra, C. R. Mohanty, Particulate Levels in Ambient Air in a Residential Complex at Burla, Orissa, The Indian Journal of Air Pollution Control, Vol. X, No.2, 78-83 2010.
31. Das P. K.(1991), “Determination of Optimal Size and Operation Policy for a Hypothetical Reservoir”, Technical Journal, Institute of Engineers(India),Orissa State Centre.
32. Development of Distress Models for Flexible Pavements”, Technical Journal of the XVII Annual Convention of Civil Engineers, Institution of Engineers (India), Nov. 24-25, 2001, Bhubaneswar, pp-125-131.
33. Pradhan, P. K. (1998) “Behaviour of plate anchors in marine clay”. Technical Journal, Institution of Engineers (I), OrissaStateCenter, 32-36.
34. Acharya P. K., Patro S. K. And Moharana N. C. “Effect of Lime on Mechanical and Durability Properties of Blended Cement Based Concrete”, Journal of the Institution of Engineers (India): Series A, Vol. 97(2), 2016, pp 71–79. (Springer).
35. Tripathy, P. K., Nayak, A. N. (2013), "Importance of building form and architectural design concepts for eliminating torsional effects due to earthquake forces.  Annual Technical, 2013, Institution of Engineers (India) Odisha State Centre, Bhubaneswar.
36. Dash, R., Dash, Rakesh Roshan “Bank Filtration: An Indirect Method of Artificial Recharge”, Standards India, 2012, 25 (12), 10-16 .
37. C. R. Mohanty, A.K.Swar, B.C. Meikap, Waste heat recovery from the exhaust gases of sponge iron kilns, Process and Plant Engineering, 27 (1), 71-74, 2009.
38. Das P. K.(1992), “Computational Methods in Flood Routing”, Technical Journal, Institute of Engineers(India),Orissa State Center, Vol 33.
39. Swain, P.C. (1999). “Fuzzy Dynamic Programming for Reservoir Operation.” Technical Annual, Institution of Engineers (India), Vol. 41, 49-59 (Awarded).
40. Acharya P. K. and Patro S. K. “Flexural behaviour of ferrochrome ash concrete beams”, Indian Concrete Journal, Vol. 90, July 2016. (Special issue-sustainability).
41. Pradhan, G. K., Pradhan, P. K. and Rajasekhar, S. (1994) “Stability of fluid flows through a porous medium”. Journal of Physical and Mathematical Sciences, Vol. 28, No. 4, 149-167.
42. Tripathy, P. K., Nayak, A. N. (2014). Computer aided earthquake resistant design and detailing of multi-storeyed RC framed building. Annual Technical, 2014, Institution of Engineers (India) Odisha State Centre, Bhubaneswar.
43. Sahoo, S., Mohanty C. R., Panda, H., Dash, Rakesh R. “Industrial wastes for filling materials”, Recent Research in Science and Technology, 2014, 6(1): 101-105.
44. C. R. Mohanty, A.K.Swar, B.C. Meikap, Low-velocity pneumatic conveying of pollution control equipments dust in sponge iron plants, Process and Plant Engineering, 27 (2), 38-42, 2009.
45. Maitra, B., Padwal , R., Boltze, M.and Das, S. S. (2012) ‘Role of Fare Model in Design of Rural Feeder Service With Fixed-Route Fixed-Schedule Form of Operation.” ’ Indian Highway, IRC, June, pp. 83-91.
46. Das P. K., Mishra S. C.,(1993)“The Finite Element Method in Ground Water Hydrology-A Review” , Technical Journal, ,Orissa Engineering Congress,Vol 35, PP 52-57.
47. Swain P.C. and Mahapatra, S.K. (1998) “Prediction of Flood Flow into the Hirakud Reservoir on Mahanadi.” Technical Annual, Institution of Engineers (India), Vol.39, pp. 94-100.
48. Pattanaik S. C., Gopalkrishnan E., and Patro S. K., “A Study of deterioration of Reinforced Cement Concrete Structures in Mumbai”, Indian Concrete Journal, Vol. 89(5), 2015, pp 51-58.
49. Pradhan, P. K.(1994) “Failure of foundation soil due to liquifaction under earthquake”. Technical Journal, Orissa Engineering Congress - 1994, 21-26. Recipient of 2nd Prize in Civil Engg. Division.
50. Nayak, A. N., Tripathy, P. K. (2017). Free Vibration Analysis of Grid Slabs using FEM. Annual Technical, 2017, Institution of Engineers (India) Odisha State Centre, Bhubaneswar.
51. Prusty, S. R., Jena, S. and Panigrahi, R., 2023. Assessment of acid and chloride resistance of ferrochrome slag-based geopolymer concrete. Indian concrete Journal.
52. Panda, H., Sahoo S., Mohanty C. R., Dash Rakesh Roshan “Removal of hexavalent chromium from aqueous solution by using industrial waste”, Recent Research in Science and Technology, 2014, 6(1): 106-110.
53. C. R. Mohanty, A.K.Swar, B.C. Meikap, Interlocking system for air pollution monitoring and control in steel making industries by DRI route, Process and Plant Engineering, 27 (3), 26-31, 2009.
54. Patro S. K., Selvam R. P. and Bosch H., "Bridge Flutter Modeling using h-adaptive FEM", Journal of Wind and Engineering,Vol. 7, No. 2, July 2010, pp 39-48.
55. Panigrahi, S.K. and Sahoo, A.K. (2003). “Possible use of T-section columns in RC frame”, The Indian Concrete Journal, Vol.77, No.12, 1518-1522.
56. Das, S. S. and Maitra, B. (2007) ‘A Covariance Heterogeneity Nested Logit Model for Choice of Rural Feeder Service to Bus Stop’ Indian Highway, IRC, December, pp. 31-39.
57. Das P. K., Mishra S. C.,(1993) “Design Procedure to Prevent Scouring Across a Bridge Pier by Horse-Shoe Vortex - A New Concept” , Technical Journal Orissa Engineering Congress ,Vol 28, PP 37-40.
58. Swain, P.C. (1996) “Satellite Monitoring of Reservoir sedimentation.” Orissa Engineering Congress Souvenir, Vol.41, pp. 10-13.
59. Patro S. K., Selvam R. P. and Bosch H., “Bridge Flutter Modeling using h-adaptive FEM”, Journal of Wind and Engineering,Vol. 7, No. 2, July 2010, pp 39-48.
60. Mahakul, B. and Pradhan, P. K. (1993) “A case study of feasibility of ground water potential in Bhawanipatna block of Kalahandi district”. Technical Journal, Institution of Engineers (I),Orissa State Center, 88-92. Recipient of BanabihariMohanty Memorial Award for the best paper in irrigation and water management.
61. Tripathy, P. K. and Nayak, A. N. (2018). Seismic analysis and design of multi-storeyed unsymmetrical RC framed building. Annual Technical, 2018, Institution of Engineers (India) Odisha State Centre, Bhubaneswar.
62. Prusty, S. R., Jena, S. and Panigrahi, R., 2022. Fresh and hardened properties of Geopolymer concrete: A review. Indian concrete Journal.
63. Dash, R. , Dash, Rakesh Roshan, Balomajumdar, C., Kumar, A. “Biodegradation of metal cyanides from cyanide bearing simulated wastewaters by suspended cultures of Stemphylium loti (MTCC 2542)”, International J. Geotechnics and Environment, 2010, 2 (1), 45-54.
64. B. Raj Mohan, S. Biswas, C. R. Mohanty, B. C. Meikap, Simultaneous control of gaseous and dust air pollutants by - A gas-liquid contacting towers. Process and Plant Engineering, 35 (2), 29 – 34, 2006.
65. J. Munda, P.K. Pradhan and A.K. Nayak, “ A Review on the performance of Modified Cam-Clay Model for fine grained Soil”, Journal of Civil Engineering and Environmental Technology, Vol 1, 2014, pp.62-67
66. J.Meher & R.Jha(2011)"Time series analysis of rainfall data over Mahanadi river basin",Emerging Science,3(6),22-32.
67. “Use of fly-ash & other stabilizing agents for construction of cost effective roads in Sambalpur district of Orissa”._INDIAN HIGHWAYS- July – 2010. Pg -21-25
68. Patro S. K. and Sinha R., "Seismic Performance of Dry-Friction Energy Dissipation Devices in Shear-Frame Buildings", Journal of Structural Engineering, SERC, Vol. 36, No. 2, June – July 2009, pp 114-121.
69. Panigrahi, S.K.“Comparative study between columns having T-shape and Square shape”. The Institution of Engineers (India), 270-275, 2004.
70. Das, S. S., Maitra, B. and Boltze, M. (2007) ‘Valuing Attributes of Rural Feeder Service to Bus Stop’ Indian Highway, IRC, May, pp. 9-16.
71. Das P. K., Mishra S. C.,(1989)“A Mathematical Approach to Detect the effect of pollution on a Bore well in Confined Aquifer” , Technical Journal, Institute of Engineers(India),Orissa State Centre.
72. Mahakul, B., Swain, P.C., and Behera, A.K. (1994) “Time of Travel of Flood Water from Hirakud to Mundali on River Mahanadi.” Orissa Engineering Congress Souvenir, Vol.39, pp. 63-68.
73. Patro S. K. and Sinha R., “Seismic Performance of Dry-Friction Energy Dissipation Devices in Shear-Frame Buildings”, Journal of Structural Engineering, SERC, Vol. 36, No. 2, June – July 2009,pp 114-121.
74. Pradhan, P. K. (1993) “Aerial photograph interpretation and its application to Civil Engineering”. Technical Journal, Orissa Engimeering Congress - 1993, 1-7.
75. NIL
76. NIL
77. NIL
78. NIL
79. NIL
80. NIL
81. NIL
82. NIL
83. NIL
84. NIL
85. Patel, G. and Nayak, A. N. (2021). Design aids for buckling load of clamped cylindrical panel under uniform loading. Annual Technical, 2021, Institution of Engineers (India) Odisha State Centre, Bhubaneswar.
86. Jena, S., Panigrahi, R. and Sahu, P., 2019. Mechanical and Durability Properties of Fly Ash Geopolymer Concrete with Silica Fume. Journal of The Institution of Engineers (India): Series A, pp.1-9.